How To Make A Flute Out Of Bamboo? (Easiest Way)

how to make a flute out of bamboo

Have you developed a hobby of making a flute out of bamboo? You may need a proper guideline. Then don’t go anywhere because I’m here to explain how to make a flute out of bamboo in an easy way. To make a musical instrument with its traditional plant is effortless.

There is no need for any high-end power tool. Find a perfect piece of bamboo, take measurements, and go for action. Read this whole write-up to know the total procedure to make a flute out of bamboo in the simplest way. I’ll describe them step by step and fulfill all your desirable quarries.

Read More:

How To Make A Flute Out Of Bamboo: In 8 Easy Steps

how to make a flute out of bamboo

The bamboo flute is an artistic instrument that produces tunes. So, a systematic procedure is required to get the ultimate product. The task can be easy with the steps below.

Step 1: Find The Piece Of Bamboo

Find narrow pipe-shaped bamboo. Take a piece that has at least one node. There are better choices than the tender piece of bamboo alone. Look for a reasonably dry and keep it under sunlight for two-three days.

Step 2: Collect The Tools

The process requires a little arrangement, like some power tools or manual instruments, including a drill machine, Dremel bits, a sharp knife, a sander, a rod, etc. With these arrangements, the task will be more effortless and time-saving. Suppose anyone doesn’t have these tools, no worries. Start with a sharp knife and your highest effort. Read Here: 5 Best Books to Learn about Bamboo: An Extensive Guide

Step 3: Bamboo Preparation

Rub the notches of the selected piece with a sandpaper or hacksaw to get an even and smooth shape. If there are several nodes, identify the critical area and do sand polish only there. Now clean the outer surface.  Clean the notches inside the bamboo with a dowel rod or burn it with a hot poker. It is necessary to create a fine tune. Read Here: How To Sand Bamboo Sticks? In 5 Simple Steps

Step 4: Select The Pipe Length And Cut It Down

Mark the length as required. A flute of 29-30 cm in length is ideal. Note that there should be a node near the head section. Now finalize the area for the flute and cut down the extra with a sharp knife. 

Step 5: Cut The Mouthpiece

This task is probably the trickiest part. Give a marking 4 or 5 cm from the flute’s edge and start cutting a hole. This job will be easy with a rotary tool. But a sharp thick blade is also applicable. When using the drill, go slower and gradually speed up. Make sure the embouchure is at most 10 to 12mm.

Step 6: Cork Setting

Now it’s time to put the cork on. Cut a piece of solid wood or bamboo into a round crosswise. Now slowly squeeze the upper part and flatten it a bit. The length of the cork and the distance from the front edge to the embouchure will be the same.

To check the fit of the cork:

  • Insert it from the front end of the flute and see if it sits along the embouchure.
  • If the fit is good, apply glue to the outer surface of the flute and set the cork.
  • Blow the flute and see what sound it produces.

Step 7: Make Finger Holes

It’s time to drill the finger holes. You can make 3 or 4 holes according to requirement. But ensure they are on a straight line and maintain equal distance from each other. Now mark the exact place of the holes and start to drill with a subtle rotary tool. Finally, smoothen the finger holes with a burning rod. Read Here: Bamboo Stakes: Support Your Plants With Bamboo Stakes!

Step 8: Polishing And Decoration

This final touch is entirely optional. Those who want a more artistic and absolute product can try this step. Do a final sandpaper finish, then varnish with any polishing agent for a shiny appearance.

A traditional method is to cover the specific area of the flute with mud and burn it into a slight flame. As a result, the flute gets a fantastic black shade in several places, and it looks incredible.

Read More:

4 Major Things To Consider Before Making A Flute Out Of Bamboo

how to make a flute out of bamboo

As you have already understood, making musical instruments is quite tricky. It is vital to have some concerns while creating a flute with bamboo as a professional or DIY lover. Otherwise, the product will be low quality. Quickly check the following things to perform an even better job.

1.    Quality Of Bamboo:

Choose a piece of bamboo that is not so tender and dense. On the other hand, being too thin is not appreciated as a flute. It may become brittle during drilling. A perfectly dried and stable piece assists in making the highest quality instrument. The other thing is to avoid the bamboo of extra nodes.

2.   Thickness Of The wall:

Bamboo less thickness is the most suitable for flute making as it produces the perfect tone. But it is risky. Hence, find a hollow one to collect the bamboo. If this is not possible, reduce the thickness of the outer surface using a dowel tool.

3.   Use Of Power Or Manual Tool :

Be careful when using tools to make such delicate devices. Applying too much pressure while using the Dremel tool can cause the hole to enlarge or the flute to break. Always start with minimal speed. When using a sharp knife for cutting the bamboo, place it on a hard surface and maintain safety(1). Read Here: How to Make Bamboo Spoon and Fork

4.   Rechecking The Finger Holes:

After finishing making the flute, check the finger holes to see whether they work perfectly. Recheck the measurements and go for repair as needed.

Read More:

Frequently Asked Questions

how to make a flute out of bamboo

Is Making Bamboo Flute Easy?

Bamboo flutes or other instruments are easy to make because of their nature. The mechanism of the flute is very straightforward. Just one bamboo pipe, measurement-wise holes, and cork are all about this noisemaker. Anyone can do the job finely with simple steps and basic instrumental knowledge. Because the material is available and the process is simple. Read Here: What Can You Make Out of Bamboo? 10 DIY Projects to Try

What Is A Kind Of Bamboo Used To Make A Flute?

A flute can be made well from almost any strong and hollow bamboo. The species is preferable as it is perfect for delicate artistry. Bamboo with less thickness is suitable for making flutes because it produces more subtle tunes. But traditionally, Madake bamboo is famous for making Japanese Shakuhachi flutes(2). The species is preferable as it is perfect for delicate artistry.

How Long Do Bamboo Flutes Last?

Bamboo flutes are incredibly sustainable. According to quality and maintenance, it can last for three to ten years or even more. It’s not a powerful instrument, so without destroying the pipe. This flute will be usable for a long time. Keep it dry and vertically placed, and never drop it from a height.

Read More:

Conclusion:

Artistic tool-making is all about care and creativity. These are all about how to make a flute out of bamboo. I’ve presented the thing as efficiently as possible. Hopefully, anybody can give it a shot by following this guide. Just keep patience and practice more to get the best result. Hopefully, you now know the overall process.

References

(1)Careful Cutting: Knife Safety Tips | Professional Standards. (2008, April 2). USDA Professional Standards Training Database. Retrieved December 2, 2022, from https://professionalstandards.fns.usda.gov/content/careful-cutting-knife-safety-tips

(2)Yoshikawa, S. (2017). Japanese Flutes and Their Musical Acoustic Peculiarities. Current Research in Systematic Musicology. https://doi.org/10.1007/978-3-319-47292-8

Similar Posts